I'm currently n the process of accumulating parts to finish my D-Street autocross build on my 2011 V6 performance package Mustang and was hoping to install my new suspension components while the SCCA season is still suspended. So far I've amassed a new set of Koni Yellows, custom RE suspension/Ford racing bumpstops, StranoParts adjustable rear sway bar, Ford Factory "Crash bolt kit" (to go along with slotting the struts per the factory manual), and a fresh set of Ford strut tops.
Before I start pulling the car apart I was hoping to gain some clarification regarding the hardware Ford uses on the factory mustang suspension. Specifically, is the suspension hardware for the s197 one time use?
I was reading some information on the Ford Performance/American Muscle websites and found they sell a complete hardware kit called the "Ford Performance Handling Pack Fastener Kit" (https://www.americanmuscle.com/ford-performance-handling-pack-fastener-kit-0514-gt.html).
In the description it describes the factory hardware as 1 time use, I just want to clarify if anyone can confirm this? Every other suspension build (albeit on other manufacturers cars) I've reused factory hardware provided it was in good condition. Looking for some feedback about what TMO members have used when modifying their mustangs' suspension. I'll order them ASAP if necessary, but want to ensure I'm not throwing money down the drain.
Thanks in advance for any insight you might be able to provide,
J
Before I start pulling the car apart I was hoping to gain some clarification regarding the hardware Ford uses on the factory mustang suspension. Specifically, is the suspension hardware for the s197 one time use?
I was reading some information on the Ford Performance/American Muscle websites and found they sell a complete hardware kit called the "Ford Performance Handling Pack Fastener Kit" (https://www.americanmuscle.com/ford-performance-handling-pack-fastener-kit-0514-gt.html).
In the description it describes the factory hardware as 1 time use, I just want to clarify if anyone can confirm this? Every other suspension build (albeit on other manufacturers cars) I've reused factory hardware provided it was in good condition. Looking for some feedback about what TMO members have used when modifying their mustangs' suspension. I'll order them ASAP if necessary, but want to ensure I'm not throwing money down the drain.
Thanks in advance for any insight you might be able to provide,
J