Funny thing about that video. The suspension was broken and they still gave it a perfect score. The car would clunk when you turned left because the left sway bar end link had play in it. I was scrambling trying to get it fixed before the shoot but didn't know where the problem was until...

Hey guys and gals. For sale is a set of extremely rare Touge Factory Enkei NT03+M 18x9.5 ET27 wheels. Included are BFG Rivals sized 275/35-19 and they have around 2k miles. The wheels have some small scrapes from my car being towed. These wheels look good and they are very light at around 19lbs...

I hoped that I never would have had to post in this thread. I hit a retaining wall head on while on a mountain road. I really should have died tumbling off the mountain. Thankfully my quick thinking, the retaining wall, and my car, Toothless, saved me. I have a couple burns from the airbag, but...

Where is the option for ABS disabled completely by unplugging a wheel speed sensor? I don't know if I would recommend it, it is easy to flat spot a tire. It is however a great way to COMPLETELY disable the traction/stability control nannies.

I'll take pictures the next time my car is on jack stands. If you take a look at step 19 in the instructions below, I believe that it shows that they trimmed the plastic for more clearance for the ducts. I also have squeezed my brake ducts for more clearance...

I didn't have any rubbing issues with the factory wheels with either the 9 or 9.5 inch wheels.

Here are some more pictures...

Here is my BFG rival review. I have stock suspension minus the rear sway bar and -2.0 degrees of camber in the front. I just got some 18x9.5 Enkei NT03's and I am running 275/35-18 at all four corners.Street The rivals are surprisingly compliant on the street, there is not that much noise when...

I finally got some wheels so now I am running 18x9.5 square all around. I don't have the rear sway bar and I got an alignment from John Mueller (he advised to take off the rear sway bar) with -2.0 degrees of camber in the front. It was a bit of a shock having that much understeer with the...

This has happened to me a couple dozen times. It always seems to do this when I'm driving aggressively and always seems to kill my fastest autox run by turning back on during the run and screwing up the rest of it. For my next autox I'm doing the Vaughn Gitten Jr. Trick of disconnecting a wheel...

On 2010+ mustangs the rear fender is rolled from the factory so that it is very thin. The fronts may be able to be rolled further.

I just got mine and installed it this morning. First impressions are good, there is a noticeable increase in noise and vibration enough so that coins in my center console were rattling that didn't before. The increase in noise and vibration is definitely worth the much better shifter feel as...

Whoops too excited to post my new wheels that I didn't check close enough. :o

Nitrogen fill / bleed air. Not that I would spend the money on nitrogen fill anyway.

Sorry that the wheels are dirty and that the pictures are huge. They are Enkei NT03+M 18x9.5 ET27 at all four corners. The wheels barely clear the brakes. I could fit 7 sheets of paper in between them but I could not fit 8. The tires are BFG rivals sized 275/35-18.