TMSBOSS
Spending my pension on car parts and track fees.
athens7 said:Well, shame on me for not reading the information at the bottom of the order page. Apparently, this retrofit kit does NOT work with the MGW shifter. The quote above seemed to indicate that the kit would work with the MGW, but the more info section on the order page says the kit will not work with MGW shifters. What, if any, relief is or will be available for Boss owners with MGWs, Blowfish brackets, and shifter rattle? When and how much?
I have the bracket and MGW installed.
There is a strong possibility that the vibration you experience is caused by contact of the original mountain studs with the MGW rear mount.
First fit with my mount showed little to no clearance between the bracket and the studs. I rotated the bracket 180 degrees and the problem was solved.
This may be an option to remove your vibration.